Main Features for LC-1002 Infusion Pump:
1.with bolus rate
2.Available for most brand of I.V sets after an easy calibration
3.with internal battery which can be disassembled for easier transportation.
4.the flow rare in ml/h and drop/min can convert automatically.
5.Double MPU in work to ensure system security
6.With intelligent interface on back panel,can update unit software & connect to nurse call jack
7.Ultrasound detection of air and selectable drop sensor can make the infusion safer.
Detailed spec.
Model No.
LC-1002
Flow Rate
1.0～800ml/h(0.1 ml/h step 100～800ml/h)
Bolus Rate
600～800 ml/h(default value is 600ml/h)
Volume Limit
1-9999ml
Applicable IV sets
Comply with all brands after calibration
Accuracy
±5%
Bubble sensitivity
Detestability of air bubble ≥40uL
Occlusion alarm pressure
100Kpa±20KPa
Alarming
Air Bubble,Occlusion,Door Open,Complete infusion, Low power,Motor failure,Drop abnormal,Low temprature,Pause overtime,Electrical circuit jam,Error set of accuracy,Air detect circuit error,Motor control error,battery exhausted
Drop Sensor
Selectable
KVO rate
KVO rate as at 1 ml/h with flow rate no higher than 10 ml/h; as at 3 ml/h with flow rate higher than 10 ml/h
Internal Battery
Fully charged 6 hours,the internal DC 12V Ni-MH battery can continously run over 4 hours at average rate level.
